Ford KUGA Owner's Manual page 30

E105064
3. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
4. Carefully prise out the battery with the
screwdriver.
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
5. Install a new battery (3V CR 2032) with
the + facing downwards.
6. Assemble the two halves of the remote
control.
7. Install the key blade.
Remote Control without a Folding
Key Blade
1
E87964
Kuga (CBSCBS) Vehicles Built From: 15-10-2012Vehicles Built From: 15-10-2012
Keys and Remote Controls
3
2
1
1. Press and hold the buttons on the
edges to release the cover. Carefully
remove the cover.
2. Remove the key blade.
E105362
3. Twist the screwdriver in the position
shown to start separating the two
halves of the remote control.
E119190
4. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
28
3
4