Ford KUGA Owner's Manual page 117

Hide thumbs Also See for KUGA:
Table of Contents

Advertisement

Station Tuning Control
Note: When you reach the first or last
station within an ensemble, further tuning
will skip to the next ensemble. There may
be a delay during this change and the audio
will briefly mute.
Press the RADIO button and select DAB1
or DAB2. Both preset banks operate in the
same way and can store up to 10 different
preset stations.
Seek Tuning
1.
Select a station.
2. Press a seek button. The radio will stop
at the first station it finds in the
direction chosen.
Radio Station List
Note: Only the stations in the current
ensemble are shown in the display.
This feature displays all the available
stations in a list.
1.
Select a station.
2. Press function button 1.
3. Press the up and down arrow buttons
to navigate to your required station.
4. Press OK to confirm your selection.
Manual Tuning
1.
Select a station.
2. Press function button 2.
3. Press the left and right arrow buttons
to tune up or down the waveband in
small increments. Press and hold to
move through the waveband quickly.
4. Press OK to confirm your selection.
Scan Tuning
This feature allows you to listen to the first
few seconds of each station while
searching through a waveband.
Kuga (CBSCBS) Vehicles Built From: 15-10-2012Vehicles Built From: 15-10-2012
Audio System
1.
Select a station.
2. Press function button 3.
3. Press a seek button to begin the scan.
4. Press function button 3 or OK to
continue listening to the currently
tuned station.
Station Preset Buttons
Note: Stations stored on preset buttons
may not always be available if you have left
the coverage area. The audio will mute
when this happens.
This feature allows you to store up to 10
favorite stations from any ensemble in
each preset bank. They can be recalled by
selecting the digital waveband and
pressing one of the preset buttons.
1.
Select a station.
2. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
momentarily as confirmation.
Radio Text
Note: Extra information may not always be
available.
You can display extra information such as
artist name, news, etc. To turn this on,
select a station and press function button
4.
Service Linking
Note: If a digital station has no
corresponding FM station, the audio will
mute when attempting to switch.
Note: When linked to a corresponding FM
station, an FM symbol displays below the
station name.
115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents