Hill Start Assist - Ford KUGA Owner's Manual

E142627
Note: The lever is pink.
3. Apply the brake pedal. Using a suitable
tool rotate the lever forward while
pulling the selector lever out of the park
position and into the neutral position.
Note: See an authorized dealer as soon as
possible if this procedure is used.

HILL START ASSIST

WARNINGS
The system does not replace the
parking brake. When you leave your
vehicle, always apply the parking
brake and move the transmission selector
lever into position P (Park).
You must remain in your vehicle once
you have turned the system on.
During all times, you are responsible
for controlling your vehicle,
supervising the system and
intervening, if required.
If the engine is revved excessively or
if a malfunction is detected, the
system will turn off.
The system makes it easier to pull away
when your vehicle is on a slope without the
need to use the parking brake.
Kuga (CBSCBS) Vehicles Built From: 15-10-2012Vehicles Built From: 15-10-2012
Transmission
When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes are released
automatically once the engine has
developed sufficient drive to prevent your
vehicle from rolling down the slope. This
is an advantage when pulling away on a
slope, (for example from a car park ramp,
traffic lights or when reversing uphill into
a parking space).
The system will turn on automatically on
any slope which can result in significant
vehicle rollback.
Using Hill Start Assist
1. Press the brake pedal to bring your
vehicle to a complete standstill. Keep
the brake pedal pressed.
2. If the sensors detect that your vehicle
is on a slope, the system will turn on
automatically.
3. When you remove your foot from the
brake pedal, your vehicle will remain
on the slope without rolling away for
approximately two or three seconds.
This hold time will automatically be
extended if you are in the process of
driving off.
4. Drive off in the normal manner. The
brakes will be released automatically.
Switching the System On and Off
Note: You can only switch the system on
and off if your vehicle has a manual
transmission.
Note: The system will remain on or off
depending on how it was last set.
153