Xfp Description; Table 2-23 Xfp Compatibility - Cisco ONS 15600 Reference Manual

2.10.1 XFP Description

Figure 2-14
Figure 2-15
2.10.1 XFP Description
The 10-Gbps 1310-nm and 1550-nm XFP transceivers are integrated fiber optic transceivers that provide
high-speed serial links at the following signaling rates: 9.95 Gbps, 10.31 Gbps, and 10.52 Gbps. The
XFP integrates both the receiver and transmit path. The transmit side recovers and retimes the 10-Gbps
serial data and passes it to a laser driver. The laser driver biases and modulates single mode (SMF)
optical interfaces at 1310-nm or 1550-nm. The modules support all data encodings through an LC
connector. The receive side recovers, retimes the 10-Gbps optical data stream from a
positive-intrinsic-negative (PIN) photodetector, transimpedance amplifier and passes it to an output
driver.
Use only XFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco XFP
Caution
pluggable module's top assembly numbers (TANs) are provided in
Table 2-23 XFP Compatibility
Card
ASAP 1PIO only
(ONS 15600 SONET/SDH)
The XFP module uses the bail clasp latching mechanism, shown unlatched in
Figure
Cisco ONS 15600 Reference Manual, R8.0
2-28
Actuator/Button SFP
Bail Clasp SFP
Compatible XFP
(Cisco Product ID)
ONS-XC-10G-S1
ONS-XC-10G-L2
2-17. See the label on the XFP for technology type and model.
Table 2-23.
Cisco Top Assembly Number (TAN)
10-2112-01
10-2194-01
Chapter 2 Card Reference
Figure 2-16 and latched in