Threshold Defaults; Defaults By Card; Oc192-4 Card Default Settings; Table C-1 Oc192-4 Card Default Settings - Cisco ONS 15600 Reference Manual

Appendix C Network Element Defaults
C.2.2 Threshold Defaults
Threshold default settings define the default cumulative values (thresholds) beyond which a threshold
crossing alert (TCA) will be raised, making it possible to monitor the network and detect errors early.
Card threshold default settings are provided as follows:
•
•
Threshold defaults are defined for near end and/or far end, at 15-minute and one-day intervals.
Thresholds are further broken down by type, such as Section, Line, or STS for performance monitoring
(PM) thresholds, and TCA (warning) or Alarm for physical thresholds. PM threshold types define the
layer to which the threshold applies. Physical threshold types define the level of response expected when
the threshold is crossed.
For full descriptions of the thresholds you can set for each card, see
Note
Monitoring."
Note For additional information regarding PM parameter threshold defaults as defined by Telcordia
specifications, refer to Telcordia GR-820-CORE and GR-253-CORE.
C.2.3 Defaults by Card
In the tables that follow, card defaults are defined by the default name, its factory-configured value, and
the domain of allowable values that you can assign to it.
Some default values, such as certain thresholds, are interdependent. Before changing a value, review the
Note
domain for that default and any other related defaults for potential dependencies.
C.2.3.1 OC192-4 Card Default Settings
Table C-1
Table C-1

OC192-4 Card Default Settings

Default Name
OC192_4.config.line.AINSSoakTime
OC192_4.config.line.SDBER
OC192_4.config.line.sdh.SendDoNotUse
OC192_4.config.line.sdh.SyncMsgIn
OC192_4.config.line.SFBER
OC192_4.config.line.sonet.SendDoNotUse
PM thresholds—(OC-N and ASAP cards) Can be expressed in counts or seconds; includes line,
electrical path, and SONET thresholds.
Physical Layer thresholds—(OC-N and ASAP cards) Expressed in percentages; includes optics
thresholds.
lists the OC192/STM64 LR/LH 4 Port 1550 card default settings.
C.2.2 Threshold Defaults
Chapter 12, "Performance
Default Value Default Domain
08:00 00:00, 00:15, 00:30 .. 48:00
(hours:mins)
1.00E-07 1E-5, 1E-6, 1E-7, 1E-8, 1E-9
FALSE FALSE, TRUE
TRUE FALSE, TRUE
1.00E-04 1E-3, 1E-4, 1E-5
FALSE FALSE, TRUE
Cisco ONS 15600 Reference Manual, R8.0
C-3