Cisco ONS 15600 Reference Manual page 271

Chapter 13 SNMP
Table 13-5 Supported ONS 15600 SNMPv2 Trap Variable Bindings (continued)
Group Associated Trap Name(s)
D failureDetectedExternal
ToTheNE (from
CERENT-600-mib)
(Variable
Binding
Number) SNMPv2 Variable Bindings Description
(1) cerentGenericNodeTime
(2) cerentGenericAlarmState
(3) cerentGenericAlarmObject
Type
(4) cerentGenericAlarmObject
Index
(5) cerentGenericAlarmSlot
Number
(6) cerentGenericAlarmPort
Number
(7) cerentGenericAlarmLine
Number
(8) cerentGenericAlarmObject
Name
(9) cerentGenericAlarm
AdditionalInfo
(10) snmpTrapAddress
13.7.2 Variable Trap Bindings
The time that an event occurred.
The alarm severity and service-affecting status.
Severities are Minor (MN), Major (MJ), and
Critical (CR). Service-affecting statuses are
Service-Affecting (SA) and Non-Service
Affecting (NSA).
The entity that raised the alarm. The NMS
should use this value to decide which table to
poll for further information about the alarm.
Every alarm is raised by an object entry in a
specific table. This variable is the index of
objects in each table; if the alarm is
interface-related, this is the index of the
interface in the interface table.
The slot of the object that raised the alarm. If a
slot is not relevant to the alarm, the slot number
is zero.
The port of the object that raised the alarm. If a
port is not relevant to the alarm, the port number
is zero.
The object line that raised the alarm. If a line is
not relevant to the alarm, the line number is
zero.
The TL1-style user-visible name that uniquely
identifies an object in the system.
Additional information for the alarm object. In
the current version of the MIB, this object
contains provisioned description for alarms that
are external to the NE. If there is no additional
information, the value is zero.
The address of the SNMP trap.
Cisco ONS 15600 Reference Manual, R8.0
13-9