Figure 2-13 Mylar Tab Sfp; Table 2-22 Sfp Compatibility - Cisco ONS 15600 Reference Manual

Chapter 2 Card Reference
Use only SFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP
Caution
pluggable module's top assembly numbers (TANs) are provided in
Table 2-22 SFP Compatibility
Card
ASAP 4PIO only
(ONS 15600 SONET/SDH)
To determine the line rates supported by each SFP/XFP, see the
on page
SFPs are integrated fiber optic transceivers that provide high-speed serial links from a port or slot to the
network. Various latching mechanisms can be used on the SFP/XFP modules. There is no correlation
between the type of latch and the model type (such as SX or LX/LH) or technology type (such as Gigabit
Ethernet). See the label on the SFP/XFP for technology type and model. One type of latch available is a
Mylar tab as shown in
and a third type of latch is a bail clasp
SFP dimensions are:
•
•
•
SFP temperature ranges for are:
•
•
•
Figure 2-13
Compatible SFP
(Cisco Product ID)
ONS-SE-2G-L2
ONS-SE-Z1
ONS-SI-622-L2
ONS-SI-155-L2
ONS-SC-2G-46.1 through 60.6
ONS-SC-2G-30.3 through 44.5
ONS-SI-2G-S1
A-12.
Figure 2-13, a second type of latch available is an actuator/button
Height 0.03 in. (8.5 mm)
Width 0.53 in. (13.4 mm)
Depth 2.22 in. (56.5 mm)
COM—Commercial operating temperature range –5 to 70 degrees C
EXT—Extended operating temperature range –5 to 85 degrees C
IND—Industrial operating temperature range –40 to 85 degrees C
Mylar Tab SFP
Cisco Top Assembly Number (TAN)
10-2013-01
10-1971-01
10-1936-01
10-1937-01
10-2170-01 through 10-2184-01, and 10-2186-01
10-2155-01 through 10-2169-01, and 10-2185-01
10-1992-01
"A.3 SFP/XFP Specifications" section
(Figure 2-15).
Cisco ONS 15600 Reference Manual, R8.0
2.10 SFP/XFP Modules
Table 2-22.
(Figure 2-14),
2-27