Circuit Information In The Edit Circuit Window - Cisco ONS 15600 Reference Manual

Chapter 7 Circuits and Tunnels

7.2.5 Circuit Information in the Edit Circuit Window

You can edit a selected circuit using the Edit button on the Circuits window. The tabs that appear depend
on the circuit chosen:
•
•
•
•
•
•
Using the Export command from the File menu, you can export data from the Path Protection Selectors,
Path Protection Switch Counts, State, and Merge tabs in HTML, comma-separated values (CSV), or
tab-separated values (TSV) format.
The Show Detailed Map checkbox in the Edit Circuit window updates the graphical view of the circuit
to show more detailed routing information, such as:
•
•
•
•
•
For BLSRs, the detailed map shows the number of BLSR fibers and the BLSR ring ID. For path
protection configurations, the map shows the active and standby paths from circuit source to destination,
and it also shows the working and protect paths. Selectors appear as pentagons on the detailed circuit
map.
Alarms and states can also be viewed on the circuit map, including:
•
•
•
•
•
•
•
General—Displays general circuit information and allows you to edit the circuit name.
Drops—Allows you to add a drop to a unidirectional circuit. For more information, see the
"7.5 Multiple Destinations for Unidirectional Circuits" section on page
Path Protection Selectors—Allows you to change path protection selectors. For more information,
see the "7.6 Path Protection Circuits" section on page
Path Protection Switch Counts—Allows you to change path protection switch protection paths. For
more information, see the
State—Allows you to edit cross-connect service states.
Merge—Allows you to merge aligned circuits. For more information, see the
Circuits" section on page 7-25.
Circuit direction (unidirectional or bidirectional)
The nodes and STSs that the circuit traverses, including slots and port numbers
The circuit source and destination points
Open Shortest Path First (OSPF) area IDs
Link protection (Path Protection, unprotected, BLSR, 1+1) and bandwidth (OC-N)
Alarm states of nodes on the circuit route
Number of alarms on each node organized by severity
Port service states on the circuit route
Alarm state/color of most severe alarm on port
Loopbacks
Path trace states
Path selector states
"7.6 Path Protection Circuits" section on page
7.2.5 Circuit Information in the Edit Circuit Window
7-13.
7-13.
7-13.
"7.14 Merged
Cisco ONS 15600 Reference Manual, R8.0
7-9