Operating The Under-Bench Air Conditioner; Basic Notes On Operation; Using The Remote Control - Dometic FreshWell 2000 Operating Manual

FreshWell2000
8 Operating the under-bench air
conditioner
8.1

Basic notes on operation

The under-bench air conditioner has three operating modes:
Operating mode
Off
Stand-by
On
The receiver switches on when it receives pulses from the remote control.
The display shows the temperature setting, after a few seconds the display
switches off.
You can use the remote control to
z switch the under-bench air conditioner to and from stand-by mode.
z adjust the settings
z select additional functions
8.2

Using the remote control

The remote control must be pointed at the IR receiver (fig. 2
the receiver during operation.
When a button is pressed, the value is transmitted directly to the under-bench
air conditioner. The under-bench air conditioner confirms the receipt of data
with a high note.
EN

Operating the under-bench air conditioner

Features
The under-bench air conditioner is switched off.
The remote control is inactive.
The roof air conditioning is ready for operation and can be
switched on with the remote control.
The under-bench air conditioner is conditioning the air in the
interior.
page 3) on
4,
17