Advertisement
• If connecting a single REL as a dedicated centre channel sub, connect the black wire of the REL to the
negative centre channel speaker terminal; twist together the red and yellow wires and connect this pair
to the positive centre channel speaker terminal.
• If connecting a REL as a dedicated rear channel sub, connect the black wire of the REL to either the left
rear or right rear negative speaker terminal; connect the yellow wire to the left rear positive speaker
terminal; connect the red wire to the right rear positive speaker terminal. If the amplifier is of balanced
differential design, please follow the instruction in the section above labeled Differential Connection.
When connecting to a home cinema system where a .1/LFE channel output is present, connect a single
phono cable between the sub output of the processor/receiver and the .1/LFE input jack on the Arrow™
Wireless Transmitter.
7
Advertisement
