Table of Contents
Advertisement
To edit a user account, first open the list of users. Select a user name and click
.
To delete a user, open the list of users and select a user. Click
to delete.
Network
The system is rebooted to make your changes effective. Make sure that each field is correctly filled before you
click
.
The default status is checked to prevent incorrect input during installation. This can
take a long time for the software installation at every reboot of the video server. For this reason, you should disable
this option after entering the network settings correctly (especially the IP address). If this option is disabled, the video
server is started with the current IP address. Following a power failure, the video server can be automatically
restarted and operated. The user can start the IP installation program to check the IP address assigned to the video
server if this address was forgotten or if the UPnP function is used by the video server (under MS Windows XP , the
UPnP function is offered under Network Location).
The administrator can change the network settings to adapt them to the networks used. Some of the subnet masks
with wideband service may be different from the default parameter 255.255.255.0 and the service provider may
assign his own specific network settings. The administrator should change the configuration according to the
parameters supplied by the service provider. The configuration can include
,
,
,
and
. After changing the network settings, leave the option
blank to skip the installation procedure when the system is rebooted, since
otherwise the settings are deleted.
18
Advertisement
Table of Contents
