Spa Maintenance - Jacuzzi J-315 Installation Manual And Use & Maintenance

J-300 series
Hide thumbs Also See for J-315:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
the memory and will continue to countdown once power is re-
gained.
If the duration countdown timer is not at "0" and you need to re-
set it:
A. Press and hold the Jets pump 1 and Cooler buttons at the
same time for 3 seconds.
B. Press the Warmer button to scroll to "U".
C. Press the Jets pump 1 button to switch from "U" to "O3".
C. Press and hold the Jets pump 1 and Cooler buttons at the
same time for 3 seconds.
E. Press the Warmer button to scroll to "O3".
D. Press the Jets pump 1 button to switch from "O3" to "U". The
timer has been reset to 365 days.

Spa maintenance

Proper and regular maintenance of your spa will help it retain
its beauty and performance.
I
Cleaning the filters
Your Jacuzzi
®
Premium spa is equipped with a skimmer bag and
two high-performance pleated filter cartridges located under
the filter cover.
The circulation pump drawing water through the skimmer bag
and filter cartridge filters fine debris. Large debris is filtered by
jets pump 1 drawing water through the skimmer bag and sec-
ond filter cartridge during an automated skimming/heating cy-
cle or when jets pump 1 is manually acrivated during spa use.
Combined, both filters provide unsurpassed water quality by
trapping surface oils and suspendend particles.
Dispenser for water sanitation
At authorized Jacuzzi dealers, you can purchase a dispenser
where you can place products for water sanitation).
This dispenser must be placed in the filtering cartridge (rec-
ognizable by the grille cover on the compartment) connected
to the circulation pump.
The dispenser must always be removed (while wearing latex
gloves) along with its cover during cleaning of the filter, and
is to be reinstalled when this operation is complete.
ALWAYS TURN POWER TO SPA BEFORE CLEANING
THE FILTER CARTRIDGES!
Refer to the filter cleaning/replacement procedure below:
B
E
A. Turn off power to spa.
B. Lift cover approx. 3/8" to unclip, then tilt forward to access
filter cartridges
C. Remove skimmer bag from clips, clean out, then clean out de-
bris.
D. Rotate each filter cartridge handle counter clockwise to un-
thread from mating wall fitting.
E. Lift unthreaded filters cartridges from skimmer well.
F. If present, first remove the dispenser for water sanitation, as in-
dicated above. Rinse impurities from the folds in the filters in each
cartridge with pressurized water. Start at top and work downward
to the handle. Repeat until all folds are clean.
G. Submerge both filter cartridges in spa. Tilt threaded end up-
ward to removed trapped air bubbles from each cartridge, then
keep both cartridges submerged.
28
D
C
F
G

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J-335J-355J-345J-375

Table of Contents