Compsee apex User Manual page 31

Apex III Dock User's Manual
Notes:
The Tx LED flashes Green when the Apex III PDT is
transmitting to a serial device through the Dock.
The Rx LED flashes Red when the Apex III PDT is
receiving a transmission from a serial device through
the Dock.
The LED flash rate is directly proportional to the rate
of the communications process. The appropriate LED
will flash slower when communicating at 9600 baud
than at 115,200 baud.
Supported baud rates for IR communication are 300,
600, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
and 115200.
When proper communications are in progress, the Dock
LED's will flash in conjunction with the dual purpose
DECODE and SCAN LED's on the Apex III PDT (see
Apex III PDT User's Manual).
4. When the communications process has been completed (or
stopped due to an error) the appropriate LED (Tx or Rx) will
stop flashing.
COAM30003 Rev. 1.04
3 Dock Setup And Operation
09/03/01 3-11