Compsee apex User Manual page 22

Apex III Dock User's Manual
2. If you have ordered a Dock Kit (Kit 1 or 2 – refer to the
Support Section of this manual for part numbers and
description), remove
Communications Cable, and AC Line cable (if applicable)
from the packing container (refer to Figure 3-2, Figure 3-3,
and Figure 3-4).
Figure 3-2: Apex III Dock
Power Supply
Figure 3-4: Apex III Dock Communications Cable
(10 Pin Phone Plug To DB-9)
3. Record the unit specific information on the page provided at
the back of this manual (p. 5-5) for future reference before
permanently installing your Apex III Dock.
4. Plug the female end of your AC Line cord into the Power
supply connector (refer to Figure 3-5).
Power Supply - AC Line Cord Connector
Figure 3-5: Power Supply AC Power Connection
3-2 COAM30003 Rev. 1.04
3 Dock Setup And Operation
the associated Power
Figure 3-3: AC Line Cord (120
VAC Cord Shown)
AC Line Plug
[Power Supply Side]
09/03/01
Supply,