Dock Setup And Operation; Apex Iii Dock Setup; Initial Setup Procedure - Compsee apex User Manual

Apex III Dock User's Manual
3

DOCK SETUP AND OPERATION

Apex III Dock Setup

The Apex III Dock is a sophisticated electronic device that
automatically maintains the installed Apex III PDT Battery Pack
and a spare Battery Pack in a fully charged state.
integrated features, the Apex III Dock simultaneously allows a user
or programmer to conduct Infrared (IR) communications between
the Apex III PDT and the Dock (RS-232 serial communications
between the Dock and an IBM compatible PC or other serial
device). Refer to the Apex III PDT User's Manual and Apex III
PDT Technical Reference Manual for detailed information on
conducting communications.
To ensure proper Dock operation, superior performance, and a long
service life we recommend that you follow the instructions put forth
in this User's Manual. The following information is a guideline to
be used during initial installation of the unit.

Initial Setup Procedure

1. Remove the Apex III Dock from the packing carton and
inspect the unit to ensure it is good physical condition after
shipping.
SPARE BATTERY PACK
CHARGING SLOT
Figure 3-1: Apex III Dock (Frontal View)
COAM30003 Rev. 1.04
3 Dock Setup And Operation
With it's
IR PORT INTERFACE WINDOW
SLIP-IN BATTERY
PACK CHARGING
TERMINALS
09/03/01 3-1