Congratulations on your purchase of this Effect Light. To get the most from your equipment you must read all of this manual before using it first time. Table of Contents 1. Safety Instruction ................3 Rigging the fixture ................ 4 2.
1. Safety Instruction You have to read the instruction carefully, which includes important information about the installation, operation and maintenance. • Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that he also receives this instruction booklet thus giving them the necessary information about the use and general warnings regarding the unit.
• Do not connect the device to any dimmer pack. • Do not look directly at the LED light beam while the fixture is on. • Hot lamp explosion hazard. Do not open the unit within five minutes after switching off. •...
3. Description 1. Optical lens with manual focus adjustment. 2. Hanging bracket with 2 knobs on both sides to fasten the unit and a mounting hole to fix a mounting hook. 3. Mains input with IEC socket and integrated fuse holder, connect the supplied mains cable here.
7. Troubleshooting Problem Probable cause(s) Suggested remedy No light No power to the fixture Check power connections Blown fuse If power is applied but does not light, please disconnect the unit from the mains & check / replace the fuse if necessary. Burned out lamp Install new lamp.
Need help?
Do you have a question about the FX-1 WATER and is the answer not in the manual?
Questions and answers