Instructions For Use - Reliable Steamboy T1 Instruction Manual

kEy FEATURES OF THE STEAMbOy
A. Steamer Handle
B. Trigger
C. Quick Release Cord Wrap
D. Carry Handle
E. Water Tank
F. Filter
G. Steamer Body
H. LED
I. Lower Cord Wrap
J. Power Cord
K. Steamer Head
L. Cloth Pad
M. Carpet Glider
THE FOLLOWING INFORMATION IS PROVIDED FOR SERVICE by A qUALIFIED
ELECTRICIAN ONLy:
Rated voltage: 110~120V, 60HZ, 1500W
This appliance must be grounded. Use only the proper type outlet when plugging
in the appliance, do not attempt to override the ground wire feature.

INSTRUCTIONS FOR USE

The Steamer is designed to thoroughly clean floor surfaces, such as marble,
ceramic, stone, linoleum, sealed hard wood floors and parquet.
WARNING: on surfaces that have been treated with wax, the wax may be
removed by the heat and steam action. Do not use on unsealed wood floors or
let unit stand on any wood floor for an extended period of time. This could
cause the wood grain to rise. It is therefore recommended that a test cleansing
be carried out on an isolated area of the floor. It is also recommended that
you check the use and care instructions of the surface from the floor manufac-
turer to ensure suitability to steam cleaning.
For first time use of the machine, please hold onto the switch to allow the water
to get pumped to the steam chamber. The pump will make a louder noise during
this initial operation.
04