You can check the digital channel's signal information and strength.
― If your SMART Signage TV is attached to a separate, over-the-air antenna, you can use the signal strength information to adjust the antenna for increased signal
― This function is only available for digital channels.
Reset
You can restore all SMART Signage TV settings (excluding the Internet and network settings) to the factory defaults.
1
2
― For more information on Setup, refer to the user manual that came with the SMART Signage TV.
Support
→
Self Diagnosis
→ ENTER E
strength and improved HD channel reception.
Select Reset. The security PIN entry window appears.
Enter the security PIN and select Yes. All settings are then reset. The TV turns off and on again automatically and displays the