Standby Control; Network Standby - Samsung RH55E User Manual

Power Control
Auto Power On
Max. Power Saving

Standby Control

Network Standby

- The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Off
•
On
Auto
•
Off
― The
― If
― If
•
Network Standby
This feature keeps the network power on when the product turns off.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
Off
No Signal
The message will appear if no input signals are detected.
Standby Control
option is only enabled when
No Signal
is displayed although a source device is connected, check the cable connection.
No Signal Message is set to Off, the No Signal
If this is the case, set No Signal Message
On
Power-saving mode will activate if no input signals are detected.
Off / On
Source PC or HDMI.
is set to
message does not appear.
to On.
119