Preparing For Use - Philips HX6392 User Manual

Sonicare for kids rechargeable sonic toothbrush
Hide thumbs Also See for HX6392:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Radio Equipment Directive
- Radio Equipment in this product operates
between 2402 – 2480 MHz
- Maximum RF power transmitted by the
Radio Equipment is +3 dBm

Preparing for use

Applying the replaceable panel
The Sonicare For Kids comes with 1 replaceable panel.
1 Remove the adhesive backing from the panel.
2 Apply the panel to the white section on the front of the handle
(Fig. 2).
Note: Make sure you line up the cut-out areas on the panel with
the buttons on the front of the handle.
3 Apply your favorite sticker to the panel as shown on the sticker
sheet (Fig. 3).
Reapplying a panel that has been removed
1 Rinse the panel in warm water; you may also use a mild detergent
to clean it.
2 Let the panel air dry.
3 Reapply the panel to the white section on the front of the handle.
Attaching the brush head
1 Align the brush head so the bristles point in the same direction as
the front of the handle.
2 Firmly press the brush head down onto the metal shaft until it
stops.
Note: There is a small gap between the brush head and the
handle.
11
English

Advertisement

Table of Contents
loading

Table of Contents