Making The Connections; Connecting Speakers To The Acoustimass Module - Bose acoustimass 6 series V Owner's Manual

Making the connections

Only the Acoustimass module connects to your receiver. The speakers all connect directly to the Acoustimass module.
®
WARNING: Do not connect the speakers to a receiver. This can result in damage to your system and possible electric shock.

Connecting speakers to the Acoustimass module

Insert the plug on each speaker cable into the connector on the module. Match the label on the plug to the proper connector.
1.
Use the supplied 20-ft (6.1 m) speaker cables for the three front speakers.
• Insert the R plug into the connector labeled Right Front.
• Insert the C plug into the connector labeled Center Front.
• Insert the L plug into the connector labeled Left Front.
2.
Use the supplied 50-ft (15.2 m) speaker cables for the speakers at the rear of your room.
• Insert the RR plug into the connector labeled Right Rear.
• Insert the LR plug into the connector labeled Left Rear.
3.
Insert the other end of each cable into the connector on each speaker, with the label facing down.
Note: Find the label on each speaker cable that matches it to the proper speaker:
Speaker cable label
L for the speaker at the left front
R for the speaker at the right front
C for the speaker at the center front
LR for the speaker at the left rear
RR for the speaker at the right rear
Acoustimass 6 series V system
Acoustimass 10 series V system
Setting Up
English - 7