Chapter 6 Maintenance; Restore All Parameters To Their Default Factory Values; Maintenance Function Parameters - Excell EX2005 User Manual

EXCELL PRECISION CO., LTD

Chapter 6 Maintenance

6-1 Restore All Parameters to Their Default Factory Values.

(1) While the indicator is counting back to zero, adjust SW to ON and press
(2) Display shows the flashing digits
(3) Confirm / abort.
(3-1) To confirm press the
then release the key and return the calibration SW to OFF.
(3-2) To abort, set the calibration SW to OFF directly.

6-2 Maintenance Function Parameters

Power on the machine. Press
04011210
.
.
key & don't release it until the display shows
keys while the display counts back to zero.
.
.
55
.
Restore all parameters to their
default factory values. See for details
6-2-1 .
.
Clear zero compensation and tare
value. See for details 6-2-2.
.
Clear batch setting value. See
for details 6-2-3.
Display zero voltage (mV/V)
See for details 6-2-4.
Display span voltage (mV/V)
See for details 6-2-5.
ZSME400000003
keys.
,