Tips; Index - Philips FTR9952/19S User Manual

Philips plasma tv user manual
Table of Contents

Advertisement

Tips

Poor Picture
• Have you selected the correct TV system?
• Is your monitor or house aerial located
too close to loudspeakers, non-earthed
audio equipment or neon lights, etc. ?
• Mountains or high buildings can cause
double pictures or ghost images.
Sometimes you can improve the picture
quality by changing the direction of the
outside aerial.
• Check if you have entered the correct
frequency. See Installation, p. 6.
• Are brightness and contrast out of
adjustment ? Adjust the picture settings,
see p. 13.
• Sometimes poor picture quality is possible
when having activated a S-VHS camera or
camcorder connected to the front side of
your receiver and another peripheral is
connected to EXT1 or EXT2 at the
same time. In this case switch off one of
the other peripherals.
No picture or no sound
• Are the supplied cables connected
properly? (The aerial cable to the monitor,
the other aerial to your VCR, the VGA
cables to the display, the power cables.)
• Has the child lock (p. 15) been switched
off ?
• Is your PC switched on?
• Has the Centre mode been switched off?
See Install TV Setup, Centre Mode, p. 9, or
press the white colour key on the remote
control.
• Do you see a black screen and the
indicator in front of the monitor lights up
green, this means that the display mode is
not supported. Switch your VGA-source to
a correct mode.

Index

a auto format, 9
automatic installation, 6
ACI, 6
b bilingual broadcast, 10
c camcorder, 21
centre mode, 9
child lock, 15
clock, 12
colour temperature, 13
computer, 22
country, 5
d daisy chaining, 23
decoder/descrambler, 8
digital, 10
DNR, 12
dual screen, 17
dvd keys, 25
dynamic contrast, 13
e easy text, 18
eurocable, 20
f
favourite programmes, 7
Tips & Index
28
• In case of weak or bad signal, consult your
dealer.
Control of peripheral equipment
The infrared signals of the screen may
influence the reception sensibility of other
peripherals.
Solution: replace the batteries of the remote
control or change position of other
equipment. E.g. keep away a wireless
headphone from within a radius of 1.5 m.
Remote control
• If your monitor no longer responds to the
remote control, the batteries may be
exhausted.
• You can still use the keys at the front of
your receiver.
Menu
Have you selected the wrong menu ? Press
the same key again to exit from the menu.
No stable or not synchronised VGA
picture
Check if you have selected the correct VGA
mode in your PC (640x480, 640x400,
640x350, 856x480, 800x450, MAC II, SVGA,
XGA).
If your problem is not solved:
Switch both your monitor and your receiver
off and then on again.
Never attempt to repair a defective
monitor or receiver yourself.
Check with your dealer or call a TV technician.
freeze, 12
frequency, 6
g give name, 7
h headphone, 21
i
info on screen, 10
information line, 9
interrupt the sound, 10
l
language, 5
m manual installation, 6
menu language, 5
message, 15
p peripheral equipment, 20
permanent programme number, 10
picture adjustments, 13
picture format, 10
picture mute, 9
programme list, 11
r recording, 26
reshuffle, 7
s search for TV channels, 6
select your computer, 24
End of life directives
We are paying a lot of attention to using
environmentally-friendly production
methods.Your new flat colour television
contains materials which can be recycled and
reused.
At the end of life specialised companies can
dismantle the discarded flat colour television
to concentrate the reusable materials and to
minimise the amount of materials to be
disposed of.
Please ensure you dispose of your old flat
colour television according to local
regulations.
How to dispose of exhausted batteries?
The batteries supplied do not contain the
heavy metals mercury and cadmium.
Nevertheless in many countries exhausted
batteries may not be disposed of with your
household waste. Please ensure you dispose of
exhausted batteries according to local
regulations.
Miscellaneous
. Ambient temperature: + 5~ + 45°C
. Maximum operating altitude: 2000 m
. Mains: AC 100-240V
. Power consumption: around 350W
. Standby consumption: 2 W
. Weight (excl. packaging)
Display: 42.5 kg
Receiver: 6.4 kg
. Dimensions (wxhxd):
Display: 122.2 x 68.1 x 14.6 cm
Receiver: 43.5 x 16.7 x 33.8 cm
. Wall mounting bracket included
. Flour stand optional
setup, 9
simplified remote control, 4
sleeptimer, 15
smart controls, 11
sound adjustments, 13
sound mode, 13
sound personal preferences, 12
sound pp store, 15
stereo, 10
store TV channels, 6
subpages teletext, 19
subtitles, 11
S-VHS, 26
switch TV on, 3
t teletext, 18
timers, 16
tint, 13
v VGA, 24
video recorder, 20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftr9952

Table of Contents