Preparation - Philips FTR9952/19S User Manual

TV
VCR 1 TUNER
VCR 2 TAPE
DVD SAT
M AMP CD
TV
ZOOM OK
RO3 / AAA

Preparation

Place the receiver box wherever you want, but leave at least 5 cm space free
all around the box for ventilation and do not cover the ventilation openings,
(e.g. on the ground, in a cupboard, behind a wall, in another room....).
To prevent any unsafe situations, do not place any objects on top of the
monitor or the receiver. No naked flame sources, such as lighted candles,
shoud be placed on or in the vicinity. Avoid heat, direct sunlight and exposure
to rain or water.The equipment shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be placed on it.
Connect the supplied aerial cable
cinch connectors
Make sure all screws of the cable
To connect your computer, see p. 22.
To connect other peripherals, see p. 20.
In order to obtain the best result, please use only the supplied antenna cables
between the receiver box and videorecorder, and between videorecorder and
antenna connector.
Insert the mains cord supplied
back of the monitor and the mains cord
both in the wall sockets.
Please, only use the mains cord
monitor, for the monitor and the mains cord
receiver, only for the receiver.
Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R03G-1.5V).
Press the TV key next to the display to be sure your remote control is in the
TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries batteries may not be disposed of with your
household waste. Please check on how to dispose of batteries according to local
regulations.
Switch the TV on : Press the power button
monitor and the one on the front of the receiver box.
A green indicator lights up and the screen comes on.
If the indicator is red, press the - P+ key on the remote control.
The green indicator blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu
automatically appears on the screen. The explanation appears in different languages
one at a time.
and the
VGA
as shown in the inside frontcover of this handbook.
are tightened well.
(with filter) into the
at the back of the receiver. Put
(with filter) supplied with the
cable with trailing audio
at the
MAINS INLET
supplied with the
at the right side of the
LANGUAGE
Preparation
3