Store Tv Channels; Automatic Installation; Manual Installation - Philips 42PF9945 Instruction Manual

2264.1 gb 19-12-2003

Store TV channels

After language is set correctly, you can now search for and store the TV channels in two different ways:
using Automatic Installation or Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.

Automatic installation

Automatic install
Install
Install

Manual installation

Manual install
Install
6
14:02 Pagina 6
& Select
Note: All channels must be unlocked in order to autoprogram. If
requested, enter your code to unlock all channels. (See TV, Features
menu, Childlock, p. 12.)
é Press the cursor down.
The autoprogramming option label
Start
" Press the cursor right.
'
The message
autoprogramming is displayed.
When the Automatic installation is complete, the puck navigates
to Install again.The channel list is automatically filled with all the
channels numbers of the TV channels transmitted.
Note: Channels numbers and names will always be written in Latin
characters, even when a language has been selected which uses other
characters.
Searching for and storing TV channels is done channel by
channel.You must go through every step of the Manual
Installation menu.
&
Select
Selection mode
Note: If requested, enter your code to unlock all channels.
System (See TV, Features menu, Childlock, p. 12.)
Programme
é
Press the cursor down.
Search Follow the instructions on screen.
Fine tune
Note: Search or direct selection of a TV channel.
If you know the frequency, the C- or S-channel number, enter the 3
Store
or 2 digits of the frequency or the channel number directly with
the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed.
Repeat to search for another TV channel.
in the Install menu.
Automatic install
Searching appears and the progress of
Manual install in the Install menu.
Start appears.