Table of Contents
Advertisement
2664.1 eng_aurea_AP
6
Channel installation
The first time you switched on your TV you've
selected the language of the TV menus and all the
available channels have been installed.
This chapter will help you if you find it necessary to
re-do the initial installation or if you want to tune in
a new TV channel.
rNotes:
- You do not have to follow every step described if
it is not necessary.
- Re-installation will modify the All channels list and
new added channels will not be added to any
favourite list.
6.1
Automatic installation
This section describes how to search for and store
all available channels automatically.
Step 1 Menu language
Sets the language of the TV menus. Go to a next
step if your language settings are correct.
‡ Press Menu on the remote control and select
TV menu > Installation > Language.
® Press navigation key right to enter the menu
Language.
Ò Press navigation key up or down to select your
language.
† Press
OK
to confirm.
º Press navigation key left to return to the
Installation menu.
Installation
Language
Language
Channel install...
Preferences
Connections
Factory settings
Step 2 Install TV channels
Your TV will search for and store all available TV
channels.
‡ Press navigation key down to select Channel
installation.
® Press navigation key right to enter the Channel
installation menu.
Automatic installation is highlighted.
32
27-09-2007
12:32
English
Français
Pagina 32
Ò Press navigation key right to select Start now.
† Press
.
OK
º Press the green key to start.
The installation may take a few minutes.
◊When the channel search is completed, press
the red key to return to the Installation menu.
‹ Press Menu to quit the TV menu.
If you want to rename, reorder or uninstall stored
channels, see section 6.3 Rearrange channels.
6.2 Manual installation
You can tune-in TV channels channel by channel
manually with Manual installation.
6.2.1
Select the system
‡ Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Manual installation.
® Press navigation key right to enter the Manual
installation menu.
System is highlighted.
Ò Press navigation key right to enter the System
list.
† Press navigation key up or down to select your
TV system: PAL BG, PAL I, PAL DK or NTSC M.
º Press navigation key left to return to the
Manual installation menu.
Channel install...
Manual installation
Automatic install...
System
Manual installation
Search
Rearrange
Fine tune
Store current ch...
Store as new ch...
6.2.2
Search for and store a new channel
‡ Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Manual installation > Search.
® Press navigation key right to enter the Search
menu.
Ò Press the red key to enter the frequency
yourself or press the green key to search for a
next channel.
Use more of your TV
Advertisement
Table of Contents
