Installing And Uninstalling The Module - Mitsubishi QJ71LP21 Reference Manual

4 SETUP AND PROCEDURES BEFORE STARTING THE OPERATION

4.3 Installing and Uninstalling the Module

Fully insert the module fixing
latch into the module fixing
hole in the base unit (exercise
care not to allow the module
fixing latch to separate from
the module fixing hole).
Using the module fixing hole
as a fulcrum, push the module
in the direction of arrow to
mount it into the base unit.
Check that the module is
securely fixed to the
base unit
Complete
Lift the module to disengage
the module fixing latch from
the module fixing hole.
4 - 7
(1) Installing the module
Base unit
Module locking
hook
Module connector
Base unit
Module fixing
latch
Module
fixing lever
(2) Uninstalling the module
Hold the module by both
hands, and push the module
locking hook on the top of the
module until it stops.
Pushing the module locking
hook, pull the module
downward.
Complete
Module
Module fixing hole
Push.
Module locking
hook
Module
connector
Module
Base unit
Module fixing hole
MELSEC-Q
Base unit
Module fixing
lever
Module
fixing latch
Module fixing hole
Lift
4 - 7