Computer Requirements - RCA DHG535 User Manual

Computer Requirements

For the best possible performance from your EMTA, your personal computer must meet the
following minimum system requirements (note that the minimum requirements may vary by
cable companies):
CPU
System RAM
Operating System
Sound Card
Video
CD-ROM Drive
Ethernet
USB Port
Software
*Windows is a trademark of Microsoft Corporation.
**Macintosh and the Mac OS are trademarks of Apple Computer, Inc.
Illustrations contained in this document are for representation only.
Chapter 2: Advanced Information
IBM PC COMPATIBLE
Pentium preferred
16MB (32MB preferred)
Windows* NT/2000/Me/XP/Vista
Linux
Required for audio on CD-ROM
VGA or better (SVGA preferred)
Required
10BaseT or 100BaseT
An Ethernet card makes it possible for your computer to pass data to and
from the internet. You must have an Ethernet card and software drivers
installed in your computer. You will also need a standard Ethernet cable to
connect the Ethernet card to your EMTA
USB (Windows 2000/ME/XP/Vista only)
The Universal Serial Bus is a high speed bus that enables your computer
to communicate simultaneously with a variety of peripherals. However, if
you have other peripherals that send and receive a lot of information,
such as speakers, printers or scanners, we recommend using an Ethernet
card to support this modem.
•
A TCP/IP network protocol for each machine
•
Microsoft Internet Explorer 4.0 or later or Netscape Navigator 4.0 or
later. (5.0 and 4.7 or later, respectively, are strongly recommended.)
MACINTOSH**
PowerPC or higher
24MB (32MB preferred)
Mac OS** 7.6.1 or higher
N/A
VGA or better (SVGA built-in preferred)
Required
10BaseT or 100BaseT
3