Table of Contents
Advertisement
Select "Search Removable Media (floppy, CD-ROM...)" and click on "Next", then your
8.
computer will install the drivers for the "RCA or Thomson Digital Cable Modem".
9.
When the "Completing the Found New Hardware Wizard" window appears, click "Finish" to
complete the process.
10. The EMTA installation is now complete. To validate a proper installation, perform the
following instructions:
A. Click on the "Start" icon in the lower left-hand corner of your screen.
B. Select "Settings," followed by "Control Panel." The "Control Panel" window will appear.
C. Double-click on the "System" icon, and select the "Device Manager."
D. Scroll down the list until you come to "Network Adapters." Double-click on "Network
Adapters."
E. The "RCA or Thomson Digital Cable Modem" should exist. If "RCA or Thomson Digital
Cable Modem" does not exist, the EMTA was NOT installed correctly.
Illustrations contained in this document are for representation only.
Chapter 2: Advanced Information
20
Advertisement
Table of Contents
