Connecting The Emta To A Single Computer; Attaching The Cable Tv Wire To The Emta - RCA DHG535 User Manual

Data & voice gateway
Table of Contents

Advertisement

Connecting the EMTA to a Single Computer

This section of the manual explains how to connect your EMTA to the USB or Ethernet port on
your computer and install the necessary software. Please refer to Figure 1 to help you connect
your Digital Cable Modem for the best possible connection.

Attaching the Cable TV Wire to the EMTA

1.
Locate the Cable TV wire. You may find it one of three ways:
a.
Connected directly to a TV, a Cable TV converter box, or VCR. The line will be
connected to the jack which should be labeled either IN, CABLE IN, CATV, CATV IN, etc.
b.
Connected to a wall-mounted cable outlet.
c.
Coming out from under a baseboard heater or other location. See Figure 1 for the
wiring example.
Notes: For optimum performance, be sure to
connect your EMTA to the first point the cable
enters your home. The splitter must be rated for
at least 1GHz.
Illustrations contained in this document are for representation only.
Chapter 2: Advanced Information
Fig. 1: Basic Home Wiring
12

Advertisement

Table of Contents
loading

Table of Contents