Removing The Flywheels - JVC RV-NB10BJ Service Manual

3.3.3 Removing the flywheels

(See Figs.5 and 6)
• Remove the head amplifier & mechanism control board and
D.C. motor.
(1) After turning over the cassette mechanism assembly, re-
move the slit washers (b, c) fixing the capstan shafts R and
L.
(2) Pull out the flywheel(R) and flywheel(L) respectively from
the bottom side of the cassette mechanism assembly.
3.3.4 Removing the DC solenoid and switch board
(See Fig.7)
• Remove the head amplifier & mechanism control board and
D.C. motor.
(1) Remove the screw C attaching the switch board.
(2) Remove the pawls (d, e, f, g and h) attaching the switch
board.
(3) From the top side of the cassette mechanism assembly, re-
move the pawls (i, j) attaching the DC solenoid.
1-22 (No.MB519)
Flywheel (L)
Capstan shaft L
Slit
washer b
Fig.5
Flywheel (L)
Fig.6
d
e
j
i
DC
solenoid
DC solenoid
Fig.7
Flywheel (R)
Capstan shaft R
Slit
washer c
Flywheel (R)
g
f
C
h
Switch board