Removing The Transport Protective Materials - JVC MC-8200LU Instructions Manual

Setup

3-3. Removing the transport protective materials

After opening the transport lock, proceed to the following steps without closing the door.
1.
Remove magazine No. 1.
( a See "9-1. Ejecting/loading the magazines" on page E27.)
2.
Pull out the protective material forwards.
3.
Load magazine No. 1.
( a See "9-1. Ejecting/loading the magazines" on page E27.)
4.
Repeat the same operation for each of the remaining magazines.
• In the case of re-transporting, it is necessary to remove all the discs and re-attach the protective transport materials
using the reverse procedure to the above. When this operation is required, please consult your dealer or nearest JVC-
authorized service agent.
Downloaded From DvDPlayer-Manual.com JVC Manuals
Protective material
T O
P
3 4
2
T O
P