Removing The Power Supply Board - JVC RV-NB10BJ Service Manual

3.1.5 Removing the power supply board

(See Fig.8 and 9)
(1) Disconnect the connector wires connected to
CN195 from power transformer. (See Fig.8)
(2) Disconnect the connector wires connected to
CN193 from power amplifier board. (See Fig.8)
(3) Remove the two screws G attaching the power supply
board. (See Fig.9)
CN194 and
CN191 and
CN193
CN194
CN195
Fig.8
G
Fig.9
CN191
(No.MB519)1-11