Prowax Minifit Filter; Replace Prowax Minifit Filter - oticon miniRITE-T Instructions For Use Manual

ProWax miniFit filter

The speaker has a white wax filter
attached to the end where the earpiece
is attached. The wax filter keeps wax
and debris from damaging the speaker.
If the filter becomes clogged, please
replace the wax filter or contact your
hearing care professional.
Remove the earpiece from the speaker
before replacing the wax filter.
IMPORTANT NOTICE
Always use the same type of wax filter as was originally supplied with
the hearing aid. If you are in any doubt about the use or replacement of
wax filters, contact your hearing care professional.
28 About Startup Handling Options Tinnitus Warnings More info

Replace ProWax miniFit filter

1. Tool
Wax filter
Remove the tool
from the shell. The
tool has two pins,
one empty for re-
moval and one with
the new wax filter.
Note:
If you use a mould, a hearing care professional must replace the wax filter in the speaker.
2. Remove 3. Insert
New
filter
Old
filter
Push the empty pin Insert the new wax
into the wax filter in filter using the other
the speaker and pull pin, remove the tool,
it out. and throw it out.
Final
29