Cabinet Disassembly Instructions - Philips BDP7520/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Front Unit
[7] Rear Panel
[8] BD Main CBA &
BD Mechanism Assembly
[9] Power Supply CBA
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 6(S-1)
[2] Front Unit D2
[3] SD CBA D2 2(S-2), *CN6401
Front-A
[4] D3 *3(L-3)
CBA
Front-B
[5] D3 *4(L-4)
CBA
Front
[6] D3 ----------
Assembly
[7] Rear Panel D4 (S-3), 3(S-4), (S-5)
BD Main
CBA & BD
[8] D5
Mechanism
Assembly
Power
[9] Supply D6 3(S-9), Power Cover
CBA
Main PCB
[10] D6 (S-10)
Holder
[11] Heat Sink D6 (S-11)
↓ ↓ ↓
(1) (2) (3)
[3] SD CBA
[4] Front-A CBA
[5] Front-B CBA
[6] Front Assembly
[10] Main PCB Holder
[11] Heat Sink
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Desolder
---
*6(L-1), *2(L-2),
*CN1002, *CN6802
---
---
4(S-6), 2(S-7), (S-8),
*CN6101, Wireless
LAN Adaptor
---
---
---
↓
(4) (5)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1), (L-2), (L-3) and
(L-4) are fragile. Be careful not to break them.
2. When reassembling, be sure to use the original
screws or specified screws listed in the parts
list.
3. The BD Main CBA & BD Mechanism Assembly
is adjusted as a unit at factory. Therefore, do
not disassemble it. Replace the BD Main CBA
& BD Mechanism Assembly as a unit.
1
(S-1)
1
1
[1] Top Cover
2
3
↓
1-5-1
(S-1)
(S-1)
Fig. D1
E5VK6DC