Cabinet Disassembly Instructions - Philips BDP7200/12 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Tray Panel
[3] Front Assembly
[4] Front CBA
[5] Power SW CBA
[6] FE Main CBA &
BD Mechanism Assembly
[7] BE Main CBA Unit
[8] Power Supply CBA
[9] Rear Panel
[11] AV CBA
[13] Front Bracket R
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 10(S-1)
[2] Tray Panel D2 *2(L-1)
Front
[3] D2
Assembly
[4] Front CBA D2 4(S-2)
Power SW
[5] D2 (S-3)
CBA
FE Main
CBA & BD
[6] D3
Mechanism
Assembly
BE Main
[7] D3
CBA Unit
Power
[8] D4
Supply CBA
[9] Rear Panel D5
Motor DC
[10] D5 2(S-13), Fan Holder
Fan
[11] AV CBA D5 5(S-14), (S-15),
[12] SD CBA D5
[10] Motor DC Fan
[12] SD CBA
Removal
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
*5(L-2), *3(L-3),
*CN2001
4(S-4), *CN2601,
*CN6401
(S-5), (S-6), *CN7000,
*CN7001, *CN7401,
*CN7602, Locking
Card Spacers
3(S-7a), (S-7b), (S-8),
2(S-9), *CN2600,
Power PCB Holder
6(S-10), (S-11),
(S-12), *CN2004
2(S-16), 2(S-17),
SD Card Holder
ID/
Loc. Part
No.
Front
[13]
Bracket R
↓ ↓
(1) (2)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1), (L-2) and (L-3)
are fragile. Be careful not to break them.
2. The FE Main CBA & BD Mechanism Assembly is
adjusted as a unit at factory. Therefore, do not
disassemble it. Replace the FE Main CBA & BD
Note
Mechanism Assembly as a unit.
---
1
(S-1)
1
---
---
2
---
---
---
---
---
---
1-6-1
Removal
Remove/*Unhook/
Fig.
Unlock/Release/
No.
Unplug/Desolder
D5 (S-18)
↓ ↓
(3) (4)
[1] Top Cover
Note
---
↓
(5)
(S-1)
(S-1)
Fig. D1
E5J10DC