Philips BDP7520/F7 Service Manual page 23

Detailed Error Code table (DLNA – HTTP Status Code)
Status Code
201 Created
202 Accepted
204 No Content
205 Reset Content
300 Multiple Choices
301 Moved Permanently
302 Found
303 See Other
304 Not Modified
305 Use Proxy
400 Bad Request
401 Unauthorized
403 Forbidden
404 Not Found
405 Method Not Allowed
406 Not Acceptable
A new resource was created by this unit's request.
This unit's request was accepted but its processing is not completed.
Though the server processed the request, there was no content.
No content.
• There are multiple choices.
• The server could not determine its response.
• Requested information contains multiple representations.
This status is handled as Redirection by default and complies with the content
of Location HEAD related to this response.
• Moved Permanently.
• Requested resource has been assigned to a new permanent URI (Uniform
Resource Identifier). Any future references to this source must use one of the
returned URIs.
• Indicates that requested information is moved to the URI specified by the
Location HEAD. When this status is received, the default action is tracking
the Location HEAD related to the response. When the original request
method is POST, the redirected request will use GET.
• Found.
• Requested resource resides temporarily under a different URI.(Uniform
Resource Identifier)
• Indicates that requested information exists in the URI specified by the Loca-
tion HEAD. When this status is received, Location HEAD related to the
response will be tracked by default. When the request method is POST the
redirected request will use GET.
• See other.
• The response to the request can be found under a different URI (Uniform
Resource Identifier) and to get this response, GET HTTP method will be
used.
• As a result of POST, client will be automatically redirected to the URI speci-
fied by the Location HEAD. GET will be used for requesting to a resource
specified by the Location HEAD.
This unit caches the latest resource and the requested resource is not
modified. (exception protocol error)
• Proxy will be used.
• The requested resource must be accessed through the proxy specified by the
Location field.
• Indicates that request must use the URI given by the Location HEAD to use
the proxy server.
The server could not understand this unit's request.
Indicates that the resource requested by this unit requires authentication.
The server received this unit's request, but refused to fulfill it.
The requested URI was not found.
• The method is not allowed.
• The HTTP behavior used is not allowed.
• Indicates that request method (POST or GET) is not allowed by the
requested resource.
• The client could not find an acceptable response.
• Indicates that the client specifies not to accept arbitrary representation for
Accept header which could be used by the resource.
1-9-2
Description
E5VK6ER