How To Initialize The Blu-Ray Disc Player - Philips BDP7520/F7 Service Manual

HOW TO INITIALIZE THE BLU-RAY DISC PLAYER

To put the program back at the factory-default,
initialize the BD player as the following procedure.
Note: By initializing, network is reset to disconnected
state and "Network Service Disclaimer"
appears on the screen.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the
remote control unit in that order.
Fig. a appears on the screen.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
Pickup : **
ESN : ***********************************
DRM : OK
EEPROM CLEAR <STOP>
Fig. a
4. Press [ C ] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
" ******* " differ depending on the models.
Version Info
F/W Name : *******
Version : *.***
Region : *-*
Pickup : **
ESN : ***********************************
DRM : OK
EEPROM CLEAR : OK
EEPROM CLEAR <STOP>
Fig. b
Fig. c
5. To exit this mode, press [
EXIT <POWER>
EXIT <POWER>
] button.
1-6-1 E5SK0INT