Gigaset cl660hx User Manual page 44

Setting the handset
Assigning handsets to a connection (line)
(only on a CAT-iq router)
Multiple handsets can be assigned to a connection. Incoming calls to the number designated to
a connection will be forwarded to all handsets assigned to the connection.
¤
. . . use
Connections OK
all registered handsets are displayed
Change ( = handset is assigned)
Permit/prevent multiple calls
(only on a CAT-iq router)
If the function is activated, multiple calls can be made in parallel.
¤
. . . use
Connections OK
Change ( = on)
Permit/prevent internal listening in
(only on a CAT-iq router)
If the function is enabled, an internal party can listen in to an external call and take part in the
conversation (conference).
¤
. . . use
Connections OK
Change ( = on)
Handset update
The handset supports firmware updating via the DECT radio link to the base/router
(SUOTA = Software Update Over The Air).
The base/router to which the handset is registered must also support this function
( www.gigaset.com/compatibility)
If your base/router does not support this function, you can also update the firmware
via a USB cable and Gigaset Quick Sync.
If new firmware is available for the handset a message to this effect will be displayed.
¤
Start the firmware update with Yes.
Start the firmware update manually:
¤
. . . use
Update OK
44
to select Settings
. . . use to select connection
to select Settings
. . . use to select connection
to select Settings
. . . use to select connection
to select Settings
Update OK OK . . . if there is new firmware, the update will start
Availability and operation of the functions
may differ on your telephone.
OK Telephony
OK
. . . use to select handset
OK Telephony
OK
OK Telephony
OK
OK System
OK
Assigned Handsets . . .
OK
Multiple Calls
OK
Listening In OK
OK Handset