Denon DN-200AVB User Manual page 3

Features
4.6" (117mm)
5
1.7"
(44mm)
4
1. Power Input: Use the included power adapter to connect this input to a power outlet.
See Setup for more information.
2. Power Button: Press this button to turn DN-200AZB on or off. Make sure you have
already made all device connections before powering DN-200AZB on.
3. Bluetooth Antenna: Connect the included removable Bluetooth antenna to this
connector. The antenna receives and transmits the Bluetooth signal from a paired
Bluetooth device. DN-200AZB has a communication range up to 100 feet (30.5 meters).
4. Pair Button: Press and hold this button for 3 seconds to make DN-200AZB available for
pairing to a nearby Bluetooth device. See
5. Status Light: This LED indicates the DN-200AZB's Bluetooth pairing status:
•
Not lit: DN-200AZB is not paired to a Bluetooth device.
•
Flashing quickly (approximately twice per second): DN-200AZB can be paired to a
Bluetooth device.
•
Solidly lit: DN-200AZB is paired to a Bluetooth device.
See Operation
6. Level Knob: Turn this knob to adjust the output volume level (sent to the output).
7. Input: This input receives the audio from an optional external receiver (sold separately).
Use standard speaker wire to connect a receiver to this input. See
information. The signal sent to this input will be blended with the signal from a paired
Bluetooth device, if you are using one.
8. Output: This output sends the audio from a paired Bluetooth device and optional external
receiver (sold separately) connected to the input. Use standard speaker wire to connect
this output to your loudspeakers. See
6
Front Panel
to learn how to pair/unpair a Bluetooth device to/from DN-200AZB.
2
7
Operation for more information.
Setup for more information.
3
1
Rear Panel
Setup for more
8
3