Dodge Viper 2017 Owner's Manual page 158

156 UNDERSTANDING YOUR INSTRUMENT PANEL
The following describes each feature and its operation:
Timers
When the Timers Page is selected you will be able to select
from following "Tickets":
• Current
Pressing the "Current" button displays a "real time" sum-
mary of performance timers.
• Last
Pressing the "Last" button displays the last recorded run of
performance timers.
• Best
Pressing the "Best" button displays the best recorded run
of performance timers, except for braking data.
• Save
Pressing the "Save" button will let you save the last run.
Any saved run over 10, will overwrite the last saved run
for Uconnect System storage. The operation of the Save
feature is listed below:
• With a USB jump drive installed, press the "USB" button
to save runs to the jump drive.
• With an SD Card installed, press the "SD Card" to save
runs to the SD Card.
• Press the "Uconnect" button to save the runs to the
Owner web page.
• Press the "Cancel" button to view the last timer "Ticket."
The "Tickets" contain the timers listed below:
• 0-60 MPH (0-100 km/h)
Displays the time it takes for the vehicle to go from 0 to
60 mph (0 to 100 km/h).
• ⅛ Mile (200 meter)
Displays the time it takes for the vehicle to go an ⅛ Mile
(200 meters).
• ¼ mile (400 meter)
Displays the time it takes for the vehicle to go an ¼ mile
(400 meters).
• Brake Distance
Displays the distance it takes the vehicle to make a full
stop. Contains current and last data for distance and start
– from speed.