Repair; Return; Disposal; Change Status (Release) - Endress+Hauser Ceraphant T PTC31 Operating Instructions Manual

Ceraphant T PTC31, PTP31, PTP35
W-Code
W212
W250
W270
W280
9.2

Repair

A repair is not planned.
9.3

Return

The measuring device must be returned if repairs or a factory calibration are required, or if the
wrong measuring device has been ordered or delivered. According to legal regulations,
Endress+Hauser, as an ISO-certified company, is required to follow certain procedures when
handling returned products that are in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures and
conditions on the Endress+Hauser website at www.services.endress.com/return-material
9.4

Disposal

When disposing, ensure that the materials of the device components are separated and processed
accordingly.
9.5

Change status (release)

The release number on the nameplate and in the Operating Instructions indicates the change
status of the device: X.YY. (example 1.02. ).
X Change in the main version.
Compatibility no longer provided. Device and Operating Instructions change.
YY Compatibility provided. Operating Instructions change.
Endress+Hauser
Explanation
Sensor signal outside the permitted range
Number of switch cycles exceeded
Short-circuit and overload at output 1
Short-circuit and overload at output 2
Remedy
Operate the device in the specified pressure range
Replace the device
Check output wiring. Extend the load resistance
at output 1
Check output wiring. Extend the load resistance
at output 2
Trouble-shooting
29