Ce Mark, Declaration Of Conformity; Registered Trademarks - Endress+Hauser Ceraphant T PTC31 Operating Instructions Manual

Identification
• The MWP (maximum working pressure) is specified on the nameplate. This value refers to a
reference temperature of +20 °C (68 °F) and may be applied to the device for an unlimited
time.
The test pressure (Over Pressure Limit OPL) corresponds to 1.5 times the MWP and may be
applied for a limited time only in order to avoid lasting damage.
2.2

CE mark, declaration of conformity

The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations as listed in the EC declaration of conformity and thus complies with
the statutory requirements of the EC Directives. Endress+Hauser confirms the successful testing
of the device by affixing to it the CE mark.
2.3

Registered trademarks

Ceraphire®
Registered trademark of Endress+Hauser GmbH+Co.KG, Maulburg, Germany
ReadWin®
Registered trademark of Endress+Hauser Wetzer GmbH+Co.KG, Nesselwang, Germany
LEXAN®
Registered trademark of General Electric Plastics B.V., Bergen op Zoom, Netherlands
THERMOPLAST
Registered trademark of Kraiburg TPE GmbH, Waldkraiburg, Germany
6
®
Ceraphant T PTC31, PTP31, PTP35
Endress+Hauser