Hibernation Mode - Acer TravelMate 330 Series User Manual

44 Chapter 2
Operating on Battery Power

Hibernation Mode

The following signals indicate that the computer is in Standby
mode:
The buzzer beeps
The Standby indicator lights
Warning! Unstored data is lost when you turn off the computer power in
Standby mode or when the battery is drained.
To leave Standby mode and return to normal mode:
Press any key
Move the active pointing device (internal or external PS/2)
Have the resume timer set and let it be matched
Open the display cover
Experience an incoming PC card modem event
In Hibernation mode, all power shuts off (the computer does not
consume any power). The computer saves all system
information onto the hard disk before it enters Hibernation
mode. Once you turn on the power, the computer restores this
information and resumes where you left off upon leaving
Hibernation mode.
There is one necessary conditions for the computer to enter
Hibernation mode:
The Hibernation file created by Sleep Manager must be
present and valid. See "Sleep Manager" on page 76.
In this situation, there are five ways to enter Hibernation mode:
Pressing the Hibernation hot key Fn-F4
If the waiting time specified by the System Hibernation
value elapses without any system activity
If a battery low condition occurs and the Sleep Upon