98
Chapter 5
Software
Setting a Password
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested parameter
settings.
Parameter
Description
Setu
When set, this password protects the
Password
computer and this BIOS Utility from
unauthorized entry. See the following
section for instructions on how to set a
password.
Power-on
When set, this password protects the
Password
computer from unauthorized entry. See
the following section for instructions on
how to set a password.
When Password Check on Boot and/or
Password Check During Resume is
enabled, you need to enter this password
to continue operation.
Hard Disk
When set, this password protects the
Password
hard disk from unauthorized access. See
the following section for instructions on
how to set a password.
Disk Drive
When Floppy Drive Lockout is enabled,
Control
the floppy drive connection is stopped
and disabled.
Follow these steps:
1.
Use the cursor up/down keys to highlight a Password
parameter (Setup, Power-on or Hard Disk) and press the
Enter key. The password box appears:
2.
Type a password. The password may consist of up to
seven characters (A-Z, a-z, 0-9).
Options
Disabled or
Enabled
Disabled or
Enabled
Disabled or
Enabled
Disabled or
Enabled