Download Print this page
AUSTRALIAN MONITOR IMFOB Instruction Manual
AUSTRALIAN MONITOR IMFOB Instruction Manual

AUSTRALIAN MONITOR IMFOB Instruction Manual

Flush mount microphones

Advertisement

Quick Links

IMFOB & IMFOW
Thank you for purchasing this quality Australian Monitor product
The IMFOB and IMFOW flush mount condenser microphones provide an unobtrusive solution for ambient sound
recording and sound reinforcement. These Half Omni condenser microphones are tailored specifically for distance
micing. The frequency response has been tuned to reduce plosive and overly sibilant sounds. Each model is
supplied with rubber isolation rings to keep mechanical noise and rumble to a minimum.
These quality flush mount condenser microphones are highly recommended for ambient recordings,
teleconference, surveillance, noise sensing and many other application requiring a ceiling and or table flush
mounted microphone.
What's in the box?
1 x IMFOB (black) or IMFOW (white) Microphone
2 x black or white rubber isolation rings
1 x 36.5mm x 3.0mm steel washer
1 x M20x1.5mm steel nut
Flush Mount Microphones
INSTRUCTION MANUAL
Features
Half Omni polar pattern
Tailored Frequency response
Neutral response
High sensitivity
Unobtrusive design

Advertisement

loading
Need help?

Need help?

Do you have a question about the IMFOB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AUSTRALIAN MONITOR IMFOB

  • Page 1 Flush Mount Microphones Thank you for purchasing this quality Australian Monitor product The IMFOB and IMFOW flush mount condenser microphones provide an unobtrusive solution for ambient sound recording and sound reinforcement. These Half Omni condenser microphones are tailored specifically for distance micing.
  • Page 2 INSTALLING THE MICROPHONE Each IMFOB and IMFOW microphone model is supplied with rubber isolation rings. The use of these rings is highly recommended to reduce mechanical noise and room rumble. Choose a suitable flat surface to mount the microphone. The microphone is designed to flush mount into any flat surface such as a 360º...
  • Page 3: Specifications

    TYPICAL POLAR PATTERN TYPICAL FREQUENCY RESPONSE Specifications Transducer Type Black Electret Condenser Polar Pattern Half Omni Frequency Response 40Hz – 16Khz Sensitivity 32 mV/Pa -30 dBV Electrical Impedance 200 Ω Min. Load Impedance 100 Ω Max. SPL 132dB @ 1% THD Finish Matte Black or Matte White Connection...
  • Page 4: Important Safety Information

    PERSONNEL. Rating plate and caution marking are marked on the back enclosure of the apparatus ENGINEERED BY AUSTRALIAN MONITOR Address: 1 Clyde St, Silverwater NSW 2128 Australia. Website: www.australianmonitor.com.au International enquiries email: international@australianmonitor.com.au ABN 35 007 573 417...

This manual is also suitable for:

ImfowImfcbImfcw