Table of Contents
Advertisement
Chapter 1
Overview
Cisco Connected Safety and Security UCS C240 LEDs and Buttons
This section describes the location and meaning of LEDs and buttons and includes the following topics
•
•
•
Front Panel LEDs
Figure 1-8
Figure 1-8
1
2
3
4
5
6
Table 1-7
Table 1-7
Front Panel LEDs, Definitions of States: Cisco Connected Safety and Security UCS C240
LED Name
Hard drive fault
Hard drive activity
Front Panel LEDs, page 1-15
Rear Panel LEDs and Buttons, page 1-17
Internal Diagnostic LEDs, page 1-18
shows the front panel LEDs for the Cisco Connected Safety and Security UCS C240.
Cisco Connected Safety and Security UCS C240 Server Front Panel Features
KVM connector
Pull-out asset tag
Drives, hot-swappable
(up to twelve 3.5-inch drives)
Network link activity LED
Power supply status LED
Temperature status LED
defines the LED states.
State
Off—The hard drive is operating properly.
•
Amber—This hard drive has failed.
•
Amber, blinking—The device is rebuilding.
•
•
Off—There is no hard drive in the hard drive sled (no access, no fault).
Green—The hard drive is ready.
•
Green, blinking—The hard drive is reading or writing data.
•
Cisco CSS UCS Platform Series User Guide, CPS-UCS-1RU-K9 / CPS-UCS-2RU-K9
7
Fan status LED
8
System status LED
9
Identification button/LED
10 Power button/power status LED
11 Hard drive fault LED
12 Hard drive activity LED
Status LEDs and Buttons
1-15
Advertisement
Table of Contents
