Installation Instruction; Electric Connection - Beko CTB 6255 X User Manual

3 Installing your appliance

Installation instruction

Assembly and electrical connections must be
•
carried out by specialised personnel.
Wear protective gloves before proceeding with
•
the installation.

3.1 Electric connection

The appliance has been manufactured as a
•
class II, therefore no earth cable is necessary.
The plug must be easily accessible after the
installation of the appliance. If the appliance is
equipped with power cord without plug, a suit-
ably dimensioned omnipolar switch with 3 mm
minimum opening between contacts must be
fitted between the appliance and the electricity
supply in compliance with the load and current
regulations.
8 / 51 EN
The connection to the mains is carried out as
•
follows:
BROWN = L line
BLUE = N neutral.
The minimum distance between the support
•
surfaces of the cooking pots on the cooker top
and the lowest part of the cooker hood must be
at least 65 cm. If a connection tube composed
of two parts is used, the upper part must be
placed outside the lower part. Do not connect
the cooker hood exhaust to the same conductor
used to circulate hot air or for evacuating fumes
from other appliances generated by other than
an electrical source. Before proceeding with the
assembly operations, remove the anti-grease
filter(s) (Fig.4) so that the unit is easier to han-
dle.
Cooker Hood / User Manual