Table of Contents
Advertisement
BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS
(1)
Automatic document feeder
This automatically feeds and scans multiple originals. Both sides
of 2-sided originals can be automatically scanned at one time.
►
USING THE AUTOMATIC DOCUMENT FEEDER (page 14)
(2)
Status indicator*
The status of the machine is indicated.
(3)
Front cover
Open this to remove a paper misfeed from or to switch the main
power switch on and off.
(4)
USB connector (A type)
This is used to connect a USB device such as a USB memory
device to the machine.
For the USB cable, use a shielded cable.
Supports USB 2.0 (Hi-Speed).
(5)
Operation panel
This panel hosts the [Power] button, [Power Save]
button/indicator, [Home Screen] button/indicator, main power
button, IC card reader holder, USB port (A type) and touch
panel. Use the touch panel to operate each of these functions.
►
OPERATION PANEL (page 12)
(6)
Keyboard*
Use this as a substitute for the soft keyboard displayed on the
touch panel. When not being used, it can be stored under the
operation panel.
* Peripheral device. For more information, see the User's Manual.
8
(1)
(2)
(3)
(4)
(9) (10) (11) (12)
(7)
Toner tray
This tray contains toner cartridge. When the toner in a cartridge
runs out, the cartridge that ran out must be replaced.
(8)
Bypass tray*
Use this tray to feed paper manually.
When loading paper larger than A4R or 8-1/2" × 11"R, pull out
the extension guide.
(9)
Tray 1
Store paper in this tray. Up to 1200 sheets can be stored.
(10)
Tray 3
Store paper in this tray. Up to 500 sheets can be stored.
(11)
Tray 4
Store paper in this tray. Up to 500 sheets can be stored.
(12)
Tray 2
Store paper in this tray. Up to 800 sheets can be stored.
(13)
Tray 5 (MX-LC12)*
Store paper in this tray. Up to 3500 sheets can be stored.
(14)
Tray 5 (MX-LCX3 N)*
Store paper in this tray. Up to 3000 sheets can be stored.
(5)
(6)
(7)
(8)
(13)
(14)
Advertisement
Table of Contents
