Table of Contents
Advertisement
Tray 3 - 4
1
Keep holding the handle until the lock is released.
2
A non-standard size of paper can only be loaded in tray 4. A non-standard size of paper cannot be loaded in tray 3.
3
BEFORE USING THE MACHINE
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3.
To load a different size of paper, go to the next step.
Adjust guide plates A and B by
squeezing their lock levers and sliding
them to match the longitudinal and
(A)
transversal dimensions of the paper to
be loaded.
(B)
(1) Squeeze the lock knob on guide plate A
and slide to the desired paper size.
(2) Squeeze the lock knob on guide plate B
(C)
and slide to the desired paper size.
If slid to a standard paper size, guide plate B will lock
automatically.
(3) For a non-standard paper size, after
sliding guide plate B to the desired size,
press the lock button (C).
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
17
Advertisement
Table of Contents
